Gas tanks and caps

[mockingbird812]

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: rfat16</div><div class="ubbcode-body">Thanks I'll do some reading and see what they have came up with.....Just after a quick glimpse is that the only way to get a cap to fit? Take the neck off and replace it with an original one???? Not fun </div></div>

I did not replace the neck only the small ring portion at the very end of the neck that the gas cap locks into. I used a propane torch on the original gas tank neck (that Schonye removed and sent to me) to undo the solder on the ring that the gas cap locks into and then soldered my original ring onto the Quanta gas tank. Simple process, but took time to make certain no explosions would occur!!