67 Corvette PB J56 Brake Problem

Home: Goto Homepage.
Subscribed: See all threads you’ve posted in or started.
Today's Posts: Posts made today. Bold = unread.
New Posts: Shows all unread posts since last visit.
New Thread: Newest threads by creation time.

**Fast67VelleN2O** · #1 01-08-2011, 06:02 PM

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: L30M20</div><div class="ubbcode-body">Adjust the rear shoes up until they are dragging the drum,not to tight, just so you can somewhat spin the drum/axle, there must be resistance against the shoes/piston in order the create the pressure needed to bleed properly. Good Luck! C </div></div>

1967 Corvette has rear disc brakes, not drums.

**72-SS-L48** · #2 01-09-2011, 12:50 AM

Hi Guys,

I replaced the rear brake hoses today. While everything was apart I removed the blocks, cleaned them and blew out the lines. Put everything back together and pressure bled the system. Whatever it was, we solved it. The car has 100% brakes right now.

Thanks for your help,
Dave

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

Dedicated to the Promotion and Preservation of American Muscle Cars, Dealer built Supercars and COPO cars.