Phase III super Spark CD boxes

[ssl78396]

And thats what I was after..

[PxTx]

After what?

[PxTx]

To get this of the smog tubes and headers subject andback on topic...

Anyone care to discuss these old CD boxes?

[owners2]

Just took the 2 i have out of the boxes .It say's nothing & the fin tapers on the side. Looked at it 2 & 3 times , can't figure why those have electrical tape. The sticker on the side say's "Basic tune-up specifications for computer" then at the very bottom of the basic instructions it say's (for further information contact) CLIFFORD RESEARCH & DEV. CO. INC. Costa Mesa, CA USA . Jeff

[MosportGreen66]

I have four of these original boxes, complete with wires to boot, not a single one has tape or evidence of it.

[PxTx]

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: owners2</div><div class="ubbcode-body">... The sticker on the side say's &quot;Basic tune-up specifications for computer&quot; then at the very bottom of the basic instructions it say's (for further information contact) CLIFFORD RESEARCH &amp; DEV. CO. INC. Costa Mesa, CA USA . Jeff </div></div>

Here is one what has the Clifford / Jacobs connection:



I've also seen them come in Red and Blue boxes, although I think the Balc is the most common and also the best looking.



Now is there a known timeline these boxes? I know the names have changed form Compusensor to several other names. Notice this one here has the Jacons name on the switch.



<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: MosportGreen66</div><div class="ubbcode-body">I have four of these original boxes, complete with wires to boot, not a single one has tape or evidence of it.</div></div>

Are you refering to a Jacobs kit like this?



Has anyone ever seen an original Phase III box and how it was delivered by Motion? I wonder if Joel got the manufacturer to apply his sticker, or if he would do it internally. You can kinda see there was an Motion specific instruction book in the catalog picture above.