Leaf Springs with Ladder Bars

[RichSchmidt]

About 20 years ago my good friend and old shop partner Jimmy had an a 12 bolt with those ladder bars on it,an 80 Malibu body with the frame rails notched,a burning desire to join the 2 and not 2 nickles to rub together.After cutting and welding the stock upper control arms to get the pion angle right but still left with worn out suspention bushings and socks,we had the bright idea of taking the ladder bars and drilling the front to accept a traction bar snubber.We then sheet metal screwed 2 blocks of wood to the floor of the car,positioned the ladder bars about 1" from the frame and zapped the bars right to the axle tubes.Car ran like a scalded dog and we got our first lesson on suspention design.They really should put a minimum age limit on how old you can be to buy a stick welder.