![]() Dedicated to the Promotion and Preservation of American Muscle Cars, Dealer built Supercars and COPO cars. |
|
Register | Album Gallery | Thread Gallery | FAQ | Members List | Calendar | Become a Paid Member | Search | Today's Posts | Mark Forums Read |
![]() |
|
Thread Tools | Display Modes |
|
#1
|
||||
|
||||
![]()
That's the one!
![]() What a cool car ![]() Get with Verne Frantz...he'll let you know what to look for ![]()
__________________
Bruce Choose Life-Donate! |
#2
|
|||
|
|||
![]()
[ QUOTE ]
Get with Verne Frantz...he'll let you know what to look for ![]() [/ QUOTE ] Excellent advice from Bruce! Looks like a cool car, Jacquie ![]()
__________________
Bill Pritchard 73 Camaro RS Z28, L82, M20, C60 |
#3
|
||||
|
||||
![]()
Same w/ the '62 as mentioned previously regarding the '67, always take note as quickly as possible of the build plant of these big Chevys..
It's not often it comes up but depending on each different plant's ability to supply models w/ specific options quickly, satisfying demand sometimes necessitated Canadian production units being shipped to US dealers.. Regardless of the location of the production plant or ordering dealer, besides Canadian produced cars delivered in Canada being documentable today, <u>cars originally shipped either in or out of Canada</u> usually had their Vins and options recorded resulting in documents for those Vins available from GM Canada Vintage Services today too.. Cool cars Jacquie!. (both the Chevys...not the T-Bird) ![]() ~ Pete -------------------- I like real cars best...the REAL real ones! |
#4
|
||||
|
||||
![]()
Thanks for the info on the Canadian cars, Pete. That's good stuff to know!
I'm probably going to have to just take my licks and go back after that Caprice. I don't really know why, but I just want it! Heck, I'll get $1000 worth of enjoyment out of it just cleaning it up and seeing what we've got under all that dirt. All that purple interior appears to be there and intact. The only thing I saw that needed attention was the chrome around the drivers seat. I'm definately not going to get rich reselling it...unless....Dan? You got Prince's number?? ![]() The 62...it's no 409 car. We took it out of the fumigation tank and looked it over a little. Just a nice SS Ragtop with 409 badging and some kind of a 409 setup. Looks like the low mileage could be acurate, mostly original paint and interior. The block is puzzling...the suffix code is 5J. What is that? The only casting we have been able to find so far is CFD on the back of the block - which I assume is Central Foundry Division?? We will look harder for casting numbers today. It will make someone a nice 409 wannabe driver to enjoy and take to local shows. Here's a picture of it getting a bath. Hope that Caprice cleans up as nicely! ![]() ![]() Here's the engine compartment. 340hp - wasn't that in 63?? ![]() ![]() The trim tag and deck stamp. ![]() 5J - What could that be? Maybe a truck motor?? ![]() ![]()
__________________
Jacquie |
#5
|
|||
|
|||
![]()
To each his own.
I have not kept up on the values of GM full size body cars so I could be totlally out of line here. I also think that you could buy a 1967 427/385 Implala SS car for the same or less than the price of the subject car here. Someone correct me if I am wrong. In the Mopar world we refer to the full sized cars (C bodies) as "sea" bodies, land yacths, or barges. They don't hold anywhere near the values of the intermediates or smaller bodied cars with the same engines. You can buy a 67 Coronet R/T with a factory 440/375 engine for $25k all day long. |
#6
|
|||
|
|||
![]()
December 2 of some year. I could see if it was a QJ, that would mean truck.
What is the casting numbers on the back of the block?? And head numbers? It would be worth pulling a valve cover to see. |
#7
|
||||
|
||||
![]()
Although I don't know the 5J Suffix, some Canadian cars had unique Suffixes and we've discussed them here briefly in the past..
Most were Numeric/Numeric but some were an Alpha/Numeric mix.. The Gibb Novas had an Alpha/Numeric Suffix too!. ![]() ~ Pete
__________________
I like real cars best...especially the REAL real ones! |
#8
|
|||
|
|||
![]()
[ QUOTE ]
To each his own. I have not kept up on the values of GM full size body cars so I could be totlally out of line here. I also think that you could buy a 1967 427/385 Implala SS car for the same or less than the price of the subject car here. Someone correct me if I am wrong. In the Mopar world we refer to the full sized cars (C bodies) as "sea" bodies, land yacths, or barges. They don't hold anywhere near the values of the intermediates or smaller bodied cars with the same engines. You can buy a 67 Coronet R/T with a factory 440/375 engine for $25k all day long. [/ QUOTE ] I dont know of any 427 cars out there right now that can be bought for that money. SS 396 Impalas are going for 25k if they have low miles and a POP. The royal plum part of the car also adds value in my opinion and its just my opinion. I sold a 66 ss Impala with a non matching 396 in it for 24k 5 months ago.It was a 4 speed but this is a nicer car with better options.
__________________
1970 GTO JUDGE RAM IV 23,000 miles 1969 GTO convert RAM AIR 4spd 1964 GTO convert survivor |
#9
|
||||
|
||||
![]()
There's a spider by the trim tag!
![]() ![]() Jacquie...the car looks great. Go and haggle with the lady for the 427 car... ![]()
__________________
Bruce Choose Life-Donate! |
#10
|
||||
|
||||
![]()
There are spiders everywhere Bruce! But they are all dead spiders now.
![]() ![]() ![]() I followed the link you provided Jake and I see a couple of things that would rule the 62 out as being originally a 409 car...It's an automatic and doesn't have a tach. ![]()
__________________
Jacquie |
![]() |
Thread Tools | |
Display Modes | |
|
|