Correct Coil bracket Info needed

mbxlesney · #1 11-26-2009, 09:58 PM

Im in need of info on the correct coil bracket needed for a 1970 Nova w/396 and 17" Dual snorkel air cleaner (like on the 1970 Chevelle w/LS6). In my research I have found Chevrolet used several different angled brackets depending on air cleaner application from 25 Degree to 40 degree angles. But due to no part numbers on the bracket itself and my 62-75 Parts manual does not make any mention I was hoping the knowledgable members could give me a hand. Thanks in advance.

mbxlesney · #2 11-29-2009, 03:19 AM

I found the correct one I needed. Please disregard. Thanks

**Mr70** · #3 11-29-2009, 03:30 AM

Can you post a pic of it for future reference?
I'd like to possibly correctly ID the few I have.
Thanks..

mbxlesney · #4 12-01-2009, 03:21 AM

Rick ...What I ended up using is the 1969 Z28 and 1970 Chevelle with Cowl Induction. The base on these are 17" the same as the Dual Snorkel air cleaner. Problem is there are not enough owners of the latter to get any responses. I even tried Team Chevelle. Here is a couple pics you can use for reference. The Cowl Induction style has a Higher angle (35 to 40 degree) and seems to have the oval mounting hole open and there seems to be a notch taken out at the top.

mbxlesney · #5 12-01-2009, 03:23 AM

Here is a different pic showing the angle compared to a regular coil bracket. Hope this helps you.

COPO 70 RS/Z28 · #6 12-01-2009, 05:05 AM

that bracket also runs on a 70 Z28

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Dedicated to the Promotion and Preservation of American Muscle Cars, Dealer built Supercars and COPO cars.