Interior Paint and VIN

[JohnZ]

[ QUOTE ]
Tony,
Contrary to the CRG sequence of paint application, the dash/rear package tray area was painted after body color at the factory. We have a fathom green '69 Camaro with dark green interior in our shop that clearly shows the suede finish dark green paint that was applied in the dash area and rear package tray area after the body color fathom green. The metal package tray corners are put in bare and usually rust underneath the overlap areas. The vin tags are painted separately and do not typically match the dash paint, sometimes they are black, sometimes color painted.
Mark

[/ QUOTE ]

Mark, I don't agree - you may be looking at a body that had an interior repaired in the in-line repair booth after color. I was there (at Norwood) in '69, and the interior color was shot in the second prime booth, and masked off after the second prime oven, prior to entry to the first color booth. The package shelf corner pieces were installed prior to interior color, and were raw metal, which is why they rust.

The VIN plate process varied from plant to plant, and sometimes within each plant; sometimes they were black, and sometimes they were interior (dash top) color, painted prior to installation. The VIN plate and reinforcement were Chevrolet parts, and were installed after the windshield (which was installed by Fisher Body), with the rivets shot from below, as shown in the Assembly Manual.

[camaromb]

John,
All the original '69 Camaros I have seen show body color under the dash paint. A quick look to the left of the dash pad has always shown body color on the metal areas of the dash on original cars I have seen. I have owned many '69 Camaros and all the cars I have currently show body color under dash paint on both black interior and color painted dash/package tray areas.
I was not there at the factory of course, I am basing this on the evidence of the original cars that have survived. It appears that many if not all were routed for dash/package tray paint after body color at the factory.
Mark

[firstgenaddict]

William's Black original paint 69 Z has black suede over spray over the white stripe color at the leading edge of wiper trans supports in the wiper well, neither have ever been repainted, can someone explain this?