Dedicated to the Promotion and Preservation of American Muscle Cars, Dealer built Supercars and COPO cars. |
|
|
|
#1
06-20-2009, 05:49 PM
|
||||
|
||||
Re: 2116 intake
You have that 180 degrees out. A 116 is the service replacement for a 110, not the other way around. Neither the 110 or 116 have the bolt hole for the alternator bracket.
__________________
...................... John Brown This isn't rocket surgery..... 
|
|
#2
06-20-2009, 06:16 PM
|
||||
|
||||
|
Re: 2116 intake
You might be able to drill and tap the pipe plug that is in one hole in the front of the 110/116 intake to use your same altenator brace though.
__________________
...................... John Brown This isn't rocket surgery.....
|
|
#3
06-20-2009, 11:21 PM
|
|||
|
|||
|
Re: 2116 intake
[ QUOTE ]
You have that 180 degrees out. [/ QUOTE ] Your right I did... I got everything backwards... The intake I am considering is a 116, not the 110. Tommy 
|
|
#4
06-21-2009, 09:51 PM
|
|||
|
|||
|
Re: 2116 intake
The 610 intake has a twisted thermostat mount and the 110/116 is straight.
Jason
|
|
#5
06-21-2009, 09:55 PM
|
|||
|
|||
|
Re: 2116 intake
Here are a few pictures to show the intake differences. On the far right is a 472 69 Z/28 intake, the center is a 2110/2116, and on the left is a 67-68 Z 610 intake.
Jason    
|
 |
| Thread Tools | |
| Display Modes | |
|
|
Hybrid Mode
