Factory appearing Tall Valve Covers?

larry_csa · #1 05-21-2009, 08:15 AM

Mark: Which valve covers do you have Noah or Year One?? Think/will it clear a stud gertel(sic) 720 lift cam.
Larry

Zach Carter · #2 05-21-2009, 05:04 PM

Larry,

Year One buys the valve covers from Noah. Best thing to do is wait till Year One sends you one of their 15% off cards and order up a couple of sets. They are always on backorder from Year One. My L72 has these valve covers with a .615 lift and full roller rockers and I had zero problems.

**92646** · #3 05-21-2009, 06:33 PM

Larry I bought these from Noah thru e-bay several years ago. I remember the price being very reasonable and the quality was very good. The covers are canted and I think there would be room for a stud girdle.
Mark Sheppard

**bilede** · #4 05-21-2009, 07:18 PM

I had a set of the aluminum 1 inch spacers machined off to 1/2 inch and at first glance you almost can't tell they are there. that was all I needed to clear rollers.

**BJCHEV396** · #5 05-22-2009, 06:44 AM

The covers from Noah are 3/4'' taller than stock.

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

Dedicated to the Promotion and Preservation of American Muscle Cars, Dealer built Supercars and COPO cars.