Dedicated to the Promotion and Preservation of American Muscle Cars, Dealer built Supercars and COPO cars. |
|
|||||||
| Register | Album Gallery | Thread Gallery | FAQ | Members List | Calendar | Become a Paid Member | Search | Today's Posts | Mark Forums Read |
|
|
|
Thread Tools | Display Modes |
|
|
|
#1
05-15-2009, 06:37 AM
|
|||
|
|||
Re: Camaro drag link issues
69 Camaro has holes only, Abodies had ball joints (don't remember off the top of my head if one or both) in the center/drag link.
__________________
TheMuscleCarGuys.com 
|
|
#2
05-15-2009, 07:12 AM
|
|||
|
|||
|
Re: Camaro drag link issues
Ramair, I looked at the Chevelle drag links and yes it is the same. The problem is the Camaro tie rods set too far into the link causing it to hit the idler and pitman during a full sweep of the suspension. The other thing I noticed was the tie rods are closer together with the Chevelle link. The Camaro, tie rod adjuster (turnbuckle) would not work. Had to be shorter. Guess I will buy the correct idler and pitman arm. Thanks.
|
|
#3
05-15-2009, 08:06 AM
|
|||
|
|||
|
Re: Camaro drag link issues
Yeah, sounds like you might have some mismatched parts there. Should be able to get it sorted out without too much issue.
__________________
TheMuscleCarGuys.com
|
|
| Thread Tools | |
| Display Modes | |
|
|
Hybrid Mode
