![]() Dedicated to the Promotion and Preservation of American Muscle Cars, Dealer built Supercars and COPO cars. |
|
#1
|
||||
|
||||
![]()
Thanks Marc - that has been Schonye's experience too.
Am curious Grady (or M22Mike if u have yr ears on). You sound pretty sure that the cap above would fit the repro tank. Are u referring to yr beautiful '69 burgundy L78 Nova?
__________________
Sam... ![]() |
#2
|
|||
|
|||
![]()
Sam, I have a reproduction tank in the burgandy Nova. I purchased the tank from Quanta. We had an original cap replated for the tank and had no problem with it fitting. I did not think that the 70 neck was different.
![]() Grady |
#3
|
|||
|
|||
![]()
Sam, Your mailbox is full! Grady
![]() |
#4
|
||||
|
||||
![]()
Grady - she's empty now!
![]()
__________________
Sam... ![]() |
#5
|
||||
|
||||
![]()
Don't drill your vented caps...
![]() When I have been driving Black Beauty... ![]() If you and try blowing through the hole on the back of a vented cap you will notice it requires a small amout of effort before you get any flow. The vented cap also has a negative pressure relief built into it as well. You can check this function by sucking on that little round thing in the back of the cap.. ![]() For you guys that are not in touch with your masculine side or are affraid of germs, use a Mighty Vac... ![]() |
#6
|
|||
|
|||
![]()
WOW Mike, learn something new about you every day!
![]() ![]() ![]() ![]() ![]() |
#7
|
|||
|
|||
![]()
I have a Spectra 70 model tank in my 70 Nova, and only the EEC cap (the wide one) fits, a standard cap will not fit, pain in ass. Somebody mentioned a fix for this,? I'm all ears and eyes, let me know
__________________
70 L78 Nova Fathom Blue,Bench, 4spd, F41, 3:55 71 Porsche 911 Targa |
#8
|
|||
|
|||
![]()
Jack Seymour has experience with this I believe........
Seems to me that the Spectra Premium neck can be modified to accept the correct cap. I can't say why Spectra Premium neck isnt correct for 70???
__________________
Chuck Sharin [email protected] Auburn,WA (30 miles South of Seattle) 70 Camaro R/S Z-28, L-78, R/S SS 69 Camaro COPO "recreation" |
#9
|
|||
|
|||
![]()
Is it normal for a "Vented" cap to allow pressure build-up. My 70 Chevelle does it. Should I drill the cap or just leave it alone?
|
#10
|
|||
|
|||
![]()
Mine builds pressure ocassionally. If it gets to be a problem I just loosen it a bit. Just a personal opinion but I wouldn't drill an OE cap.
__________________
Don't mistake education for intelligence. I worked with educated people. I socialize with intelligent people. |
![]() |
Thread Tools | |
Display Modes | |
|
|