Dedicated to the Promotion and Preservation of American Muscle Cars, Dealer built Supercars and COPO cars. |
|
|
|
#1
03-11-2009, 05:22 PM
|
|||
|
|||
Re: Brake Booster Plating
When plating a booster you can do 100 boosters one after the other and get many different finishes, the metal helps determine how light and dark the final outcome will be. There is no exact science to it.
__________________
 Drive it ...Like you STOLE it !!
|
|
#2
03-11-2009, 05:47 PM
|
||||
|
||||
|
Re: Brake Booster Plating
|
|
#3
03-12-2009, 01:21 AM
|
|||
|
|||
|
Re: Brake Booster Plating
Thanks, I talked to steve today and will be sending him my parts.
|
|
#5
03-13-2009, 08:45 AM
|
||||
|
||||
|
Re: Brake Booster Plating
[ QUOTE ]
When plating a booster you can do 100 boosters one after the other and get many different finishes, the metal helps determine how light and dark the final outcome will be. There is no exact science to it. [/ QUOTE ] It has been my experiance (@ a US Naval Shipyard Plating plant) that the tint-coloration (Gold-Green-Yellow-Brown) tinting is determined by the duration of DiChromate treatment after the primary electroplating coating is applied, be it zinc, cad, etc,,, The surface condition can effect the level of 'Gloss' for lack of a better term (i.e. Brightness) Blasting parts prior to plating is usually not desired. It can be difficult to find local plate shops who even runs traditional cad tanks due to tightend eco rules (cyanide issues). It is amazing how much is plated on the cars when you really examine all the parts and you can save a ton ($$)on replacment costs if you can find a resonable priced plater to work with. 
__________________
69 Los Z11 68 SS/RS 396/325 68 Los Z28 
|
|
#6
03-13-2009, 05:12 PM
|
||||
|
||||
|
Re: Brake Booster Plating
Your right on about all the junk that has to be replated on a real restoration.
Here is stuff from a 69 Camaro. I usually spend north of $600 bux on one car. I am lucky to be able to get Cad done here. Much better protection than Zink. IMO. You are correct about the gold dichromate, dwell time affects the color. I have been doing my own booster because I do not like the supper shiny finish you sometimes get with the zinc. I do blast the parts, however I then spent X amount of time smoothing surfaces to be plated. Wire brush, scotch bright buffs, and impregnated nylon wheels.   Here is one of Gregoris boosters in Zink..he does very nice work, and is fair priced too. 
|
 |
| Thread Tools | |
| Display Modes | |
|
|
Hybrid Mode
