Roof Deuce Restoration

[mockingbird812]

Here is Linda's posting from 6 Feb 2006 wrt the modification to the traction bar mounting plate area:


Earl says he bought the traction bars at Auto Parts store on Gompers Avenue. I think this was Sam's Papa's store. Earl's uncle Jack Rising used to work for this store. Earl says there were brackets on the bars for the shocks to bolt to but he cut them off so he didn't have to take the sway bar off . Then he built a set for the neighbor's Nova. He says he put the traction bars on because he was tired of hearing the springs rap when he power shifted. One night we took the car to the Cadet down at Kittanning. After we had everyone's attention by driving through a few times, I got behind the wheel and took it through the parking lot. At the end of the lot where it was dark we did a quick driver swap and Earl burned it out of the lot and slapped it through the gears out on 422. Then we switched back and I drove it back through the parking lot so everyone thought I was the one horsing it. We had a lot of fun that night.