Dedicated to the Promotion and Preservation of American Muscle Cars, Dealer built Supercars and COPO cars. |
|
|||||||
| Register | Album Gallery | Thread Gallery | FAQ | Members List | Calendar | Become a Paid Member | Search | Today's Posts | Mark Forums Read |
|
|
|
Thread Tools | Display Modes |
|
|
|
#1
|
|||
|
|||
|
What width 15x6-15x7-15x8??? The offset seems pretty dang tight.
Sean |
|
#2
|
||||
|
||||
|
We have 15 x 6 on the front and 15 x 7 on the rear...the TTO's will limit your tire size due to their backspacing. You could use the tires you have without a problem...probably 235's on the rear and 215's on the front would work with the Torque Thrusts...maybe a little more...those are 67 Chevelle/Chevy 2 dog caps on our 70...something different from the million other cars with COPO caps
![]()
__________________
02 Berger 380hp #95 Lots of L78 Novas Join National Nostalgic Nova! 70 Orange Cooler 69 Camaro |
|
#3
|
|||
|
|||
|
I've got 15x6 and 15x7 rims on it. I think I've got like a 195 or 205 tire on the front, and I know I've got 255s on the rear. The drivers side cleared fine. I had to roll the quarter panel lip slightly on the passenger side because when I went around sharp curves, the tire would rub. It seems like I remember reading about several guys having the same issue that I did with tire clearance, that the driver's side had more clearance than the passenger side. As posted above, you would be safer with a 235 tire.
__________________
Andy 1967 Camaro 406 4 speed 1969 C/10 383 5 speed 1969 D300 318 4 speed 1969 Super Bee 383 4 speed 1972 K/5 350 Turbo 350 1972 Duster 340 727 1974 'Cuda 340 4 speed |
|
#4
|
|||
|
|||
|
Torque thrusts are nice but every new mustang has a look alike pair on them, Cragers are more old school.
|
|
#5
|
|||
|
|||
|
Nobody mentioned slots.. I have always liked the look of a set of Ansen or Fenton slots
. Tommy ![]() |
|
#6
|
|||
|
|||
|
I have 16x7 and 16x8 polished TT II's on mine, but E/T Mags or the TTO's look great with the Fathom Blue! Just my opinion.
__________________
Jed 69,70,71 Nova's 1955 Bel Air and a 69 Camaro. |
|
#7
|
|||
|
|||
|
Torque Thrust D's .
Here is an old Torque Thrust that I had on the rear of my 72 Nova. Someone was throwing a pair of them away and I grabbed them. They don't have any name on the back. I use them to roll stuff around as one has a bad place around the center cap area. 15X7's I think. Here are the Fenton slots that are going on the 72. This car might get torn down and completed sometime before I die.... I am still gathering parts for it and that never seems to end.... The fronts mounted. They are 15X3 1/2. Tommy ![]() |
|
#8
|
|||
|
|||
|
Keep the Pics coming boys ! great shot's!
__________________
Lately into Beaumont SD's, 66,67,68 and 69 , including a 69 2 Dr Post Beaumont , an L78 2 Dr Post Chevelle LS6 Chevelle's, LS6 and L78 El Camino and Camaro fan ! Also 2 Cdn Documented COPO's, a COPO Camaro and COPO Chevelle Love GM Products |
|
#9
|
||||
|
||||
|
Winterized the fleet today...here is the dog dish with radial redlines
![]() ![]()
__________________
02 Berger 380hp #95 Lots of L78 Novas Join National Nostalgic Nova! 70 Orange Cooler 69 Camaro |
|
#10
|
|||
|
|||
|
The Torq Thrust Ds with the red stripe tires do it for me. What about the AR Salt Flat wheels? http://www.wheelsforless.com/SearchR...ords=VN4705700
__________________
Dave 1987 Grand National |
![]() |
| Thread Tools | |
| Display Modes | |
|
|