motion/mr. gasket air cleaner

[whitetop]

These ac were held in place by a U-shaped bracket that is positioned like an upside down U in the center of the ac. There is a hole in the center of the bracket that the carb stud went through. The bracket is positioned underneath the inner screen and straddles the inside of the ac holding it down tight against the carb. The nut and large washer holding everything onto the carb stud, goes on the top of the inner screen. Very easy piece to make. 99% of the used ac I have seen are missing this bracket.
Dave

[Edited by whitetop (03-28-2002 at 06:10 PM).]