Need help identifying 1966 Chevelle column parts

[Too Many Projects]

Originally Posted by 67since67

Mitch, been a long day here, tomorrow I'll look at my '66, and I also have a spare '66 column (about the only extra '66 part I have)

Originally Posted by 67Ss4spd

Mitch, Jeff Helms can answer better than me but..
I recall him saying the rubber seal is just that, a piece of 1/8” or .080 flat rubber. The repop is a 1/8” piece of foam.
The mast jacket clamp/bracket, if it’s the same as 67, I have one and you can have it, with fasteners, if it’s correct for what you need, that I’m not sure on.
Steve

Bill, thanks for being willing to look at yours, I appreciate it.

Steve, thanks, that's very generous on the bracket. I would think it's the same, except possibly for the diameter, as the '67 is the first year of collapsible and may be a little larger. I can work with the clamp being a little large...

The rubber part I need is a large cap that slides down over the mounting plate for appearance. The flat rubber band you refer to from Jeff, is labeled L in the diagram. Luckily, I have that part, and that slides into the mounting bracket to close that gap. After measuring mine, I believe a 1.75" long piece of radiator hose with 2" inside diameter would work just fine for that.