Liberty gearbox circa mid 70's??

[Day2_69Z]

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Day2_69Z</div><div class="ubbcode-body"><div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: crash</div><div class="ubbcode-body">The gear set pictured is Doug Nash stuff, the Pro-rings are part of the original gear blank, Liberty welded their Pro-rings into place...

I have a bunch of this stuff, I'll try to take some pictures of both... Crash</div></div>

Good eye Crash.... I have a Doug Nash and Yes, Doug Nash Gear set,lugs, Sliders and YES a 2:52 Ratio M22 . They had 4 ? ratios in 73/74 , 2:20 , 2:52 , 2:64 &amp; 2:88 if memory serves correct.(the 2:88's were extremely expensive and primarily used in M/P Small inch small blocks that launched &amp; shifted ,11,000-12,000 RPM ranges.</div></div>


Correction on the Doug Nash M22 Gear Ratios :
as of 1974 they offered: 9310 Nickel Alloy Steel specially heat treated in :
2:52 - 2:70. - 2:95 gear sets &amp; Cast iron case.....any one Have a Case ??