Vintage Lakewood Scattershield - Wanted

[16 Grand Sedan]

Here is a short discussion on early scatter shields that may be of interest;

http://www.camaros.org/forum/index.php?topic=7891.0

Note how all the units have the same shape and only the bolt pattern of the rear of the specific block. The multiple bolt pattern thats designed to fit several applications seems to have been less vintage of an idea than some think.

The late 60-early 70's version of the Lakewood hydro-formed scater shields were made to fit a specific flywheel diameter and application.

The #1503 was for the "Corvette & Chevy II and All Chevy Pass. including Camaro.1964-69 (Large flywheel) The seperate block plate for this application was #1570.

The #1504 fit the same group of cars but with the "Small" flywheel. The "Block plate for this unit was #1571.

#1505 is listed as for the 1964-67 Chevy II only. This also used the #1571 "Block Plate".

The picture on the page clearly shows the "straps" on the bottom portion.

This information I have given is from the "70 Edition" of the Auto World Sports-Racing Equipment Catalog.

Here is a recently completed epay auction for an early vintage Lakewood scatter shield;

http://www.ebay.com/itm/121196584764...#ht_101wt_1085