Dedicated to the Promotion and Preservation of American Muscle Cars, Dealer built Supercars and COPO cars. |
|
#6
08-13-2009, 04:58 AM
|
|||
|
|||
Re: pinion angle
Depends on if "0" is in between the 3.3 and the 1.7.If it is the pinion angle is 5,if not 1.6. 5 is fine,if 1.7 pinion down.Backup and look as I have seen several cars with positive pinion angle on the rear.The driveshaft to the pinion should be down(shaped like a V).The trans to the driveshaft should be closer to "0" for a race only app.Although this will shorten ujoint life.Jeff
|
|
|
Threaded Mode