Suggestions on polish/wax for black paint??

[70-SS/RS-L78]

Great info Dan, I would like to also add that when doing the edge of the panel such as the tops of the Vette fenders always make sure the pad is rotating away from the edge and keep it moving or you will burn it off real fast. I would recommend the novice do this by hand. On these original paint Dispersion Lacquer cars the object is to keep the heat to a minimum, these paints are soluble and are not catalyzed and the heat will soften the paint and cause a lot of problems. Urethanes like the heat, Lacquers do not.