![]() Dedicated to the Promotion and Preservation of American Muscle Cars, Dealer built Supercars and COPO cars. |
|
Register | Album Gallery | Thread Gallery | FAQ | Members List | Calendar | Become a Paid Member | Search | Today's Posts | Mark Forums Read |
|
Thread Tools | Display Modes |
#22
|
||||
|
||||
![]()
They are torque thrust D's.
I have these on my 68 as well with the same 15" x 7" footprint but running 255/60 rears and 225/60 fronts if memory serves me correct. I'm getting old and my memory isn't what it once was. Might be off a touch on front tire sizes and too lazy to walk out to the shop to confirm as I'm enjoying my coffee right now. ![]() Just an FYI on Polyglass sizes. E60's are 7.50 tread width while F60's are 8.25 wide. The G60's are only 8.40 so not much wider than the F series. The L60 is 9.00 wide but they are also an inch taller at 27.99 so they won't fit the fronts.
__________________
I like solid lifter cars, big cams and cars w/ 3 pedals in them. ![]() Last edited by NorCam; 08-24-2017 at 02:45 PM. |
Thread Tools | |
Display Modes | |
|
|