Dedicated to the Promotion and Preservation of American Muscle Cars, Dealer built Supercars and COPO cars. | 
	
		
			
  | 
	|||||||
| Register | Album Gallery | Thread Gallery | FAQ | Community | Calendar | Become a Paid Member | Today's Posts | Search | 
 
 | 
	
	
| 
		 | 
	Thread Tools | Display Modes | 
| 
		 
			 
			#61  
			
			
			
			
			
		 
		
	 | 
||||
		
		
  | 
||||
| 
		
	
		
		
			
			 
			
			That's some nice work Steve,with great results. 
		
		
		
		
		
		
		
		
	
	 | 
| 
		 
			 
			#62  
			
			
			
			
			
		 
		
	 | 
||||
		
		
  | 
||||
| 
		
	
		
		
			
			 
			
			Passenger side, front floor with the overspray visible. The factory white overspray was everywhere underneath this car. 
		
		
		
			 | 
| 
		 
			 
			#63  
			
			
			
			
			
		 
		
	 | 
||||
		
		
  | 
||||
| 
		
	
		
		
			
			 
			
			Driver's side floor front area. 
		
		
		
			 | 
| 
		 
			 
			#64  
			
			
			
			
			
		 
		
	 | 
||||
		
		
  | 
||||
| 
		
	
		
		
			
			 
			
			Top of cowl, blackout area. 
		
		
		
			 | 
| 
		 
			 
			#65  
			
			
			
			
			
		 
		
	 | 
||||
		
		
  | 
||||
| 
		
	
		
		
			
			 
			
			Driver side front cowl area. The black is flat black, not semi-gloss. Note the heavy runs in the black paint. 
		
		
		
			 | 
| 
		 
			 
			#66  
			
			
			
			
			
		 
		
	 | 
||||
		
		
  | 
||||
| 
		
	
		
		
			
			 
			
			The inside of the tran hump where the shifter goes through. This area had a random coating of the same body shutz (heavy undercoat) that the rear wheel wells had. An interesting note: It appears that the body shutz in the rear wheel wells was applied before paint. The undercoated area is painted white and when a section is peeled away, shows red oxide primer underneath. 
		
		
		
			 | 
| 
		 
			 
			#67  
			
			
			
			
			
		 
		
	 | 
||||
		
		
  | 
||||
| 
		
	
		
		
			
			 
			
			I spent the day powerwashing the frame and then using some paint stripper to get the real yucky stuff off. Look what I found under the paint by the passenger side rear of the subframe. It looks like it was hand-printed with a magic marker "5236 44." Does this correspond to anything? 
		
		
		
			 | 
| 
		 
			 
			#68  
			
			
			
			
			
		 
		
	 | 
||||
		
		
  | 
||||
| 
		
	
		
		
			
			 
			
			Here it is upside down so you dont pull a neck muscle looking at it. 
		
		
		
			 | 
| 
		 
			 
			#69  
			
			
			
			
			
		 
		
	 | 
||||
		
		
  | 
||||
| 
		
	
		
		
			
			 
			
			And here is a close up of the front coil spring. As you can see it was painted black originaly and still has the part number tag attached, #3988100 AX. Does anyone know if this tag is reproduced? I couldnt find it on Jim Osborn's site. 
		
		
		
			 | 
| 
		 
			 
			#70  
			
			
			
			
			
		 
		
	 | 
|||
		
		
  | 
|||
| 
		
	
		
		
			
			 
			
			Steve: 
		
		
		
		
		
		
			If you want the original factory order sheet and dealer info. on your car there is only one legitimate source, Pontiac Historic Services. http://www.phs-online.com/ John 
				__________________ 
		
		
		
		
		
	
	1971 BFG "Tirebird"  | 
![]()  | 
	
	
		
		
  | 
	
		
  |