Preservation Project - Green Machine - Page 9

**olredalert** · #81 02-21-2016, 05:58 PM

----Rick and Darrell,,,Had a few minutes and thought Id go thru my 1/4-20s box. Found two large Ls with no lines. One very small L with no lines. One medium sizes L with no lines. An R with a circle around it. One with just circles. One with EL and the correct circles. Another EL with slightly different circles, and one thats totally blank. All correct size thread and length and washer as pictured. A bunch more of course that arent remotely close like, of all things some Mr.Gaskets, and SEMS. Darrell, if any work for you just say the word.....Bill S

**SS427** · #82 02-21-2016, 07:44 PM

I have many of the same ones you described Bill. Something people need to remember as well when it comes to head markings, there were more often than not more than one supplier on most parts for these cars. I have disassembled hundreds of Chevelles and Camaros over the years and often find one side of the car using one vendor or head marking while on the other side another vendor or different head marking. This has been found on not only the frames but the bodies as well.

**cook_dw** · #83 02-21-2016, 09:14 PM

Excellent guys thanks!!!.. I fully understand the use of different fasteners due to many suppliers as I have documented that during this project as well as others.. Unfortunately I can not confirm if different hardware was used in this case so I have to lean towards using the same in this situation. Rick Im pm'ing you now.. Again thank you and Bill for taking the time to help out an average joe like myself.. [img]<<GRAEMLIN_URL>>/beers.gif[/img]

**SS427** · #84 02-22-2016, 02:08 PM

Darrell, your bolt went out in todays mail. Glad I was able to help.

**cook_dw** · #85 02-22-2016, 02:53 PM

Thank you!! Now tell me how much shipping was so I can at least cover that..!!.. Rick, I have to say that you and several others generosity makes this forum great.. Most people see it as just another way to make money.. For that I thank you.. If I can help you in anyway just say the word.. [img]<<GRAEMLIN_URL>>/youguysrock.gif[/img]

**SS427** · #86 02-22-2016, 03:16 PM

It's just a simple little bolt. Shipping equals one hand shake next time we cross paths. [img]<<GRAEMLIN_URL>>/beers.gif[/img]

**cook_dw** · #87 02-22-2016, 03:26 PM

That works and again thank you. [img]<<GRAEMLIN_URL>>/biggthumpup.gif[/img]

67 442 · #88 02-23-2016, 01:31 AM

The eye cap should be in the second position from the end and it does not matter which end.

**cook_dw** · #89 02-23-2016, 11:52 AM

Thanks for the tip!! [img]<<GRAEMLIN_URL>>/biggthumpup.gif[/img]

**mssl72** · #90 02-23-2016, 07:53 PM

That looks great Darrell! I was thinking of doing the same thing. I think I'll make it happen.

Dedicated to the Promotion and Preservation of American Muscle Cars, Dealer built Supercars and COPO cars.