![]() Dedicated to the Promotion and Preservation of American Muscle Cars, Dealer built Supercars and COPO cars. |
|
Register | Album Gallery | Thread Gallery | FAQ | Community | Calendar | Become a Paid Member | Today's Posts | Search |
![]() |
|
Thread Tools | Display Modes |
#1
|
||||
|
||||
![]()
These bars came on my car when purchased in '79. I plan on putting them back on in my restoration. Hoping someone knows something about these vintage parts. These were made by welding two "L" channels together into a box configuration. there are spaces between welds and not the entire length of bar (see pics). The total length to point is 29-7/8 in. the box part is 1-1/2x1-5/8 in. The only stamping is a "MC" with "E" below (see pic). Don't tell my wife I used kitchen counter for pics,LOL.
__________________
69 SS/RS 396 M20 X22 Nor 12B,72B,712 bought 1979 FULL OWNER HISTORY 69 Dick Harrell tribute Day II 427 M20 4.10 X11 76 orig pnt, 711 67 Super Stock 302 Camaro re-creation |
#2
|
||||
|
||||
![]()
Possibly homemade, using stock multi-leaf shock mounting plates?
__________________
Tim in NSW, Australia 1969 Van Nuys 04A Z/28 from Clippinger Chevrolet. Cortez Silver with dark blue interior. Ran at Lions Dragstrip and Pomona Raceway, with paint by Bob Kovacs of Fresno. |
#3
|
|||
|
|||
![]()
are they usable? Homemade I would assume.
|
#4
|
||||
|
||||
![]()
I would almost guarantee they are homemade. My dad made a set on his Nova with angle iron stock laying around the shop. Can't wait to see them cleaned up. Got any old pics of how they used to look?
|
#5
|
|||
|
|||
![]()
I can ID them as being cool!
Jason |
#6
|
|||
|
|||
![]()
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: SuperNovaSS</div><div class="ubbcode-body">I can ID them as being cool!
Jason </div></div> Seconded! Sandblast, prime, paint install and do big gnarly burnouts!!! [img]<<GRAEMLIN_URL>>/burnout.gif[/img] [img]<<GRAEMLIN_URL>>/burnout.gif[/img] Tommy [img]<<GRAEMLIN_URL>>/ ![]() |
#7
|
||||
|
||||
![]()
One side rounded clamps all homemade,if they work use them.
__________________
![]() |
![]() |
|
|