Nice original GM parts.

[Lynn]

Getting ready to post these on ebay, but wanted to see if there is any interest here first. All prices are plus actual shipping charges. All can be picked up locally for free. If you think I am out of line on pricing, please pm me as to why. I still have a lot to learn.

Will post pics if anyone is interested.

For those wanting just the short version:

Eaton 4 series Posi Carrier. Better than new. SOLD

MOROSO BRUTE STRENGTH POSI UNIT 4 SERIES SOLD

MATCHED PAIR OF 041 HEADS DATED LATE 69 (I 17 9) SOLD

FACTORY GM 4.56 GEARS, JAN 10, 1965 $150
ORIGINAL GM FRONT SWAY BAR 1969 CAMARO, Z/28 $50
330585 VALVE SPRINGS. CROSS RAM 1969 Z/28 $40
1969 Camaro Z/28 NOS RADIATOR BRACKETS $250
GM Holley Carb 3868864 list 3140 dated March 1965 $200





<span style="font-weight: bold">FACTORY GM 4.56 GEARS, JAN 10, 1965 $150</span>
Very nice factory GM gear set. Perhaps you have one of those really bad-ass Corvettes that came from the factory with 4.56 gears, but over the years they were replaced. This is your chance to buy a matched set. Dated 1 10 1965.

Used but not abused. Pinion threads are perfect. I would change out the bearing on the pinion if I were to use them.



<span style="font-weight: bold">ORIGINAL GM FRONT SWAY BAR 1969 CAMARO, Z/28</span> $50
This is just as it was removed from the car years ago. No deep rust pits. Lots of oil soaked caked on dirt which it turns out acts as a pretty good preservative.


330585 VALVE SPRINGS. CROSS RAM 1969 Z/28 $40

Back in the day, if you ordered the second design off road racing cam (154) you would have been advised to use these valve springs. These are NOS, still in the boxes.

Sorry, but I only have eight (8) of them. They come two to a box. No rust, no issues, never used. Only 6 bucks to ship to a U.S. postal address. No internationals shipping.


<span style="font-weight: bold">
1969 Camaro Z/28 NOS RADIATOR BRACKETS $250</span>
No excuses. Perfect condition genuine GM parts. I do not know if these are the same brackets used on other models. I only have my original Z/28 radiator for comparison.



<span style="font-weight: bold">GM Holley Carb 3868864 list 3140 dated March 1965 $200</span>
Dated 4th week of March, 1965. Please do your research on fitment. I know this came on several big block applications in 1965.

Very few issues. Mostly complete. I believe the front bowl has been replaced. I am not a carb expert, and have no idea where I got this one, but have had it for years in indoor storage.

No rust and no damage to the air horn. The choke plate has a very slight bend to it. I didn’t mess with it, but know it can be straightened.

The only missing part that I can see is the little linkage on the passenger side that contacts the fast idle cam. The cam is there, but the linkage that screws on the shaft is missing.

[Lynn]

I also have three 1111489 distributors. Will post the dates tonight.
$100 each.

Set of RAC guages to bolt on under the dash, mechanical water temp, mechanical oil pressure and ammeter. Still in the box with flat black mounting bracket. Great day two (OK, maybe day three) parts purchase in the early 70's. Be glad to post pics if anyone is interested. $100

[Lynn]

OK, do I didn't post the distributor dates, but will. I am in the process of cleaning out the shed at my old house and going through parts.

Anyway, I have only had one nibble on this stuff, so will be putting it all in ebay shortly. However, I would much rather sell to a member here. So... if there was something you are interested in, feel free to shoot me an offer. I can always cancel the ebay auction if I have already started one.

Thanks.
Lynn

[VintageMusclecar]

Lynn;

You have a PM.

Eric

[Lynn]

Eaton Posi is sold.

2nd Gen F body sway bar. 1.25 inch. Very nice original. Also fits 68-72 Chevelle according to the smart guys on this site.

$100 shipped.

[Lynn]

Pic

[Lynn]

1111489 DISTRIBUTOR DATES

9 E 19
8 G 16
8 M 12

Both posi units, and the heads are sold. Most of the other stuff on ebay with no reserves.
http://my.ebay.com/ws/eBayISAPI.dll?...K:ME:LNLK:MESX

[markjohnson]

That 2nd Gen F-Body front sway bar that you have is a fantastic addition to the front of a GM A-Body. Every time I would buy some kind of A-Body, I'd go to the local salvage yard and I could always find at least one WS6 Trans Am or WS6 Formula that had the large front 1.250 sway bar. Mount it with some Polyurethane bushings and end links from your local auto parts store and when combined with a factory rear sway bar and boxed control arms, you have a nice handling car for a low investment.

[Lynn]

Just hoping someone can use it.

Here are pics of the 4.56 gears and the three distributors.

[Lynn]

The 8M12 distributor is sold.

And I know we all say thanks SYC, but it seems lately that you guys have had to deal with hackers, edit issues etc.

I am sure it seems like a thankless job, so... I want to express my appreciation to Charley and everyone else who keeps this place up and running.

THANKS GUYS.