Lakewood roll bar

[Tommy]

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: 396L35</div><div class="ubbcode-body">Do you have the front part that swings away? I found a complete one about 2 months ago with the 4th bar but I thought someone might have added it.
</div></div>

No Mark, mine does not altough I have seen several over the years that did. There is a 69 Camaro in Murray,KY buried in storage that has the swingout bar still intact.


Tommy [img]<<GRAEMLIN_URL>>/[/img]

[whitetop]

Chapman Race Cars out of Ilinois made an identical foam covered roll bar.

Everybody copied everyone else products back then.

[chevyandpontiac]

Here are picture of the roll bar and the foam

[daverd]

I have a 3 point red lakewood bar out of a 69 chevelle.
if any one needs any info or pix i will post them.

[Tommy]

That would be great. The pictures of the mounting kit will help the chevelle guys out [img]<<GRAEMLIN_URL>>/biggthumpup.gif[/img]



Tommy [img]<<GRAEMLIN_URL>>/[/img]

[396L35]

Here are the pictures of the swing away bar for a 69 Camaro.

[leach]

Anyone out there got one that will fit in 1970 Nova the one that was bolted in mine was one of the things that was missing still have the holes drilled for it in the floor do they fit same car or fitted so they interchangable?

[Tommy]

Barry, read back through this thread. The roll bar is the same but the mounting kits were different for different cars. Barry, can you take pictures of the holes drilled in your back seat area and your rockers and post them please? Thanks [img]<<GRAEMLIN_URL>>/burnout.gif[/img]

Barry, what was that gear ratio you have in that 70? You told me a few years back. I think you said it was a ratio discontinued many years ago. I had been trying to remember but couldn't

Tommy [img]<<GRAEMLIN_URL>>/[/img]

[leach]

513 gear ratio

[Tommy]

Barry sent me these photos of his 70 Nova. Still waiting on the pic of the back seat area bolt holes.






Tommy [img]<<GRAEMLIN_URL>>/[/img]