Exhaust bracket plate

[SamLBInj]

Question, A friend of mine has plain jane 69 307 camaro. This car has the dual exhaust hanger plate. Question is, could you get a 307 with dual exhaust or is maybe his car is something else?
I thought those plates were only on SS and Z/28's (also copo's).

[Kurt S]

Optional on any V8.

[Jonesy]

http://hobbystage.net/camaro/media.cgi?s...21152302-000031

[SamLBInj]

Hey thanks, I guess its just a 307 x44 with dual exhaust, nice car but kinda whimpy , didnt realize you could get one with duals...do they have a differnt HP rating or still the basic 200hp?

[Z28DZ]

Same groundpounding, asphalt shredding, axle twisting 200hp rating.

[Salvatore]

Would dual exhausts come with a 4 barrell than?

[SamLBInj]

this car is a two barrel, i dont think ive seen that combo yet..

[Z28DZ]

[ QUOTE ]
Would dual exhausts come with a 4 barrell than?

[/ QUOTE ]

Dual exhaust was standard on SS & Z28 (& COPO 9560/9561). Base V8 motors (327ci & 307ci both w/2bbl) and optional V8 motors LM1 (350ci/255hp w/4bbl) and L65 (350ci/250hp w/2bbl) came standard with single exhaust.

[SamLBInj]

[ QUOTE ]
[ QUOTE ]
Would dual exhausts come with a 4 barrell than?

[/ QUOTE ]

Dual exhaust was standard on SS & Z28 (& COPO 9560/9561). Base V8 motors (327ci & 307ci both w/2bbl) and optional V8 motors LM1 (350ci/255hp w/4bbl) and L65 (350ci/250hp w/2bbl) came standard with single exhaust.

[/ QUOTE ]
Question is, could you get dual exhaust on these low horsepower engines and would they have the exhaust bracket welded in, according to Kurt at Camaro research you could, Ive never seen a 307 with this plate, as a matter of fact I never seen them on anything but a Z/28 or SS but if dual exhaust was an option I guess the plate would be there.. If you ordered an LM1 camaro with optional dual exhaust would it come with a welded in exhaust plate? I know alot people look for these plates to assume an authentic SS or Z/28 and if its not there there is a major problem.

[Salvatore]

Thanks Sam!