68/69 Impala SS427 4spd Floor Hump & Shifter Boots

[3macs1]

Looking for a good 4spd shifter hump out of a 68 or 69 Fullsize chevy Impala, caprice, etc. Bench and console are the same. Also need in any condition the upper and lower console boots and the two retaining rings plus the 4spd speedo cable.( speedo cable is the same from 65 I think)
Thanks in advance for the assistance.

[3macs1]

Well I got the upper retaining ring ( two in fact) and a line on a hump. Must be someone has this stuff stashed. Still looking for the rest.
Tks Joe

[scuncio]

If you can wait a while, I may sell my spare floor hump if my original can be saved (was hacked for the infamous V-gate shifter).

[PeteLeathersac]

What are you working on Mac...smells good so far! .

~ Pete

[3macs1]

Thanks Tony for the offer. Guess what is wrong with ours cut by jig saw to install a v-gate, but they also cut the top of the console also. Have a few consoles so we are OK there.
I think we are going to be OK on the hump also. I've looked for at least a year for a good one and in the last few days they are falling from the sky. Actually found 4 of them and have a deal worked out with one guy.

[3macs1]

Hi Pete:
I know most of the guys are not into big chevys but we are just going through the list of what we are missing to complete a frame off on a canadian documented 68 Impala SS427 Z03Z24 coupe, one of only 4 built in canada. She is going to be nice. All numbers matching. I had her since the early 80's so got most of the parts nos from GM when things were reasonable.
She has a dealer installed m22 which was installed when the car was 1 month old by the original owner, we have the m20 also but of course we overhauled the m22.Apparently the original owner could not get it unless he ordered a l-72 but wanted nothing to do with solid lifters so did the next best thing.

[twincity_jerryg1]

hello. i am new to this site and am looking for the upper boot and retainer ring for my 68 427 4-speed console car. does anyone still have a retainer ring for me? Thank for any help

[twincity_jerryg1]

The upper boot has been remade and is for sale on ebay. $195.00 seams OK. Reviews seam to be good. Still no lower boot or any of the retaining rings that i know of.

[twincity_jerryg1]

it looks like if found a upper boot retainer for a console 68 impala and the only thing im looking for is the slider. Can anyone help?