frame primer and paint

**k92** · #1 07-24-2003, 03:39 AM

I'm going to be priming then painting the frame of my ls6 soon and was wanting an opinion on what are the best and concours correct products to use???

x44d80 · #2 07-26-2003, 01:50 AM

k92, Don't be discouraged if you don't get a reply quickly this time of year, it seem alot of the guys that normally post are probably no were near a computer. Anyway, do a search under "frame paint" and you'll get the answer to your question. I know cause I asked this particular question a bit ago.
Brent

**k92** · #3 07-27-2003, 08:58 AM

Thanks

**YENKO DEUCE REGISTRY** · #4 07-28-2003, 03:36 PM

I use PPG products, primarily their DP90LF. Now that the good stuff, (bad for the environment), has been taken out of it, I think it's best to top coat it with some semi-gloss top coat - Deltron etc... But, put the good etching stuff on the bare metal first, don't forget to put the top coat on within 7 days max or lifting might occur.

Schonyenko2 · #5 07-28-2003, 05:34 PM

If possible shoot the topcoat on right after the dp flashes out. That way you don't have to go back and sand/scotchbrite the dp. Schonye

**YENKO DEUCE REGISTRY** · #6 07-28-2003, 09:15 PM

Ditto that!

Dedicated to the Promotion and Preservation of American Muscle Cars, Dealer built Supercars and COPO cars.