Dedicated to the Promotion and Preservation of American Muscle Cars, Dealer built Supercars and COPO cars. |
|
|||||||
| Register | Album Gallery | Thread Gallery | FAQ | Community | Calendar | Become a Paid Member | Today's Posts | Search |
|
|
|
Thread Tools | Display Modes |
|
|
|
#1
|
|||
|
|||
|
Could some of you more seasoned car nut's please tell me how to remove the undercoating off my car?I have tried several thing's short of a gas can and match.Thank you.
|
|
#2
|
|||
|
|||
|
Eastwood's "Under Gone" remover and cleaner is the best thing I've found, short of using a torch. It looks and works like an oven cleaner spray, but isn't as noxious. Hopefully, you have a way of flipping your car up so you don't have to crawl underneath to scrape the crap off. If not, spread a big tarp or plastic sheet under the car because softened undercoating is impossible to remove from your floor, hair, clothes, etc.
|
|
#3
|
|||
|
|||
|
Kerosene will work if you let it soak a few hours. It does stink though. No real shortcuts on undercoat. Elbow grease is still the best...BKH
|
|
#4
|
|||
|
|||
|
I have used one of those high intensity heat lamps and a scraper.
Not a job I look forward to again. |
|
#5
|
|||
|
|||
|
I used a B&D heatgun on mine. Worked pretty good. Filled two five gallon cans.
Peter
__________________
Pete Simpson 1962-2013 RIP Owen Simpson Eric Simpson |
|
#6
|
|||
|
|||
|
.Undercoating Stinks............
|
![]() |
|
|