1970 396 L78 & 454 LS6 Holley Carburetor 4492

[Fast67VelleN2O]

Holley 4492 carburetor. 9B2 date. Has correct rear metering block (4519). Front metering block is 5271. Has correct baseplate. Was converted to double pump at some point in its life. Easily repairable as I've seen Eric's work here on the site. $300 shipped.

Contact me if you're interested.

-Matt

[VintageMusclecar]

Matt;

Double-check that baseplate, it looks like a 3310 style unit--but the primary shaft does appear to be a correct `70 unit. The correct base will have a stepped 3/8' vacuum tube on the pass. side rear and should have a notch cast just ahead of the drivers rear carb mounting hole to locate the throttle tab.

[Fast67VelleN2O]

Thanks Eric. I just checked, it is indeed a 3310 baseplate with the correct 1970 throttle shaft. Looks like this carb went through the paces at some point.

Thanks again,
-Matt