F.A.S.T. Racing.

[HPMIKE]

Hey all...

I am not sure how many of you guys follow this racing format, it is VERY cool. For those that aren't familiar, the cars must have a 100% stock apperance, even down to the bias ply tires that were originally installed on the car. However, any internal engine and diveline mods are allowed, as long as they do not compromise the stock appearance of the car.

The Fall National Event took place over this weekend at VMP in Virginia.

The new FAST ET record was set by Terry Penningtons L88 Corvette. He clocked an unbelievable 10.30 pass on the bias plies with exhaust manifolds, full 2.5" exhaust and factory L88 heads. He had stiff competition from Dave Dudek in the black Hemi RR. Dave was the previous ET record holder and still holds the MPH record. The RR ran a best of 10.40, so it wasn't easy. A somewhat scary moment occured when Ed Cook. who runs a 6 pack Roadrunner and is knocking on the door of the 10's (has run 11.0's), lost control on the big end and hit the wall at over 120 MPH. Fortunately Ed wasn't hurt, and the car sustained relatively minor damage. The car Ed runs is a "real" A12 liftoff hood RR in the very rare black color. It is one of only a few made and is a very unique piece of Musclecar history. We'll get it back together. Bad news is that Ed was done for the day, even though he did get the win light during that unforgettabe pass.

Congrats to Terry and all the other competitors.

Mike

[1968 nova ss]

Congrats to Terry for setting the new F.A.S.T. et record in the L-88 corvette.I also understand a cetain 427 yellow yenko camaro broke the 11's yesterday in factory stock on bias ply tires.any comments rob clary.Chris Teed

[olredalert]

-----Have never been to one of these races but would love to. Im curious as to what MPH these 10sec cars are doing??? I have heard that the guys with these cars soften up the bottom end on these motors so they can manage to hook up at all. If thats the case they must really hit at some point to get anywhere near those kind of #s. Anybody have a vid of one of these cars launching??? Would love to see that.......Bill S

[Chris_69_SS]

[ QUOTE ]
-----Have never been to one of these races but would love to. Im curious as to what MPH these 10sec cars are doing??? I have heard that the guys with these cars soften up the bottom end on these motors so they can manage to hook up at all. If thats the case they must really hit at some point to get anywhere near those kind of #s. Anybody have a vid of one of these cars launching??? Would love to see that.......Bill S

[/ QUOTE ]

if memory serves the top guys touch 130mph...

[HPMIKE]

Here is a link showing some racing from the Martin Michigan annual event. Hope you all enjoy. If you haven't seen it in person, you don't know what you are missing.

http://blip.tv/file/1018012?filename...nations249.wmv

[John Brown]

[ QUOTE ]
-----Have never been to one of these races but would love to. Im curious as to what MPH these 10sec cars are doing??? I have heard that the guys with these cars soften up the bottom end on these motors so they can manage to hook up at all...... Bill S

[/ QUOTE ]

http://www.runboard.com/bfastracingmessageboard.f2.t483

I just saw on the fast board that Terry ran a 10.30 @ 133 mph, with a 1.5 60 foot time. Thats smoking on F70x15 repop Firestone bias plys.

[John Brown]

A little more over on moparts

http://board.moparts.org/ubbthreads/show...e=0#Post4758262

Gonna have a lot of people trying to play catch-up over the winter months.

[Shankin]

I watched over the video. Man those cars are rolling. Its just cool to see the vintage iron actually being used and enjoyed. The guy with the silver chevelle about 1/2 way through the 2nd round video was killing the gears. AWESOME!

[Postsedan]

Great video....Thanks.

Dan.

[Chevy454]

Here's a video of Terry's 10.71 @ 132 run from this past weekend...notice the car spins off the hit...