Dedicated to the Promotion and Preservation of American Muscle Cars, Dealer built Supercars and COPO cars. |
|
|||||||
| Register | Album Gallery | Thread Gallery | FAQ | Community | Calendar | Become a Paid Member | Today's Posts | Search |
|
|
|
Thread Tools | Display Modes |
|
#1
07-27-2007, 04:47 PM
|
|||
|
|||
Fan Belt P/N's 70 Z-28
What are the correct Main Fan Belt and Power Steering Belt P/N's for a 1970 Z-28? Thanks,
Paul
__________________
70 Camaro LA Z-28 03B Citrus Green LT-1 M-40 3.73's 69 Camaro X-77 Z-28 10C Cortez Silver M-21 3.73's Deluxe Project X - SOLD 69 Camaro X-77 Z-28 01B Garnet Red w/Black top, M-20 3.73 Deluxe Houndstooth 
|
|
#2
07-30-2007, 04:45 PM
|
||||
|
||||
|
Re: Fan Belt P/N's 70 Z-28
The 1970 Z/28 Fan/Alt. belt was originaly part #3953786 and was 3/8" X 44 inches long.Nearly every Chevrolet vehicle w/a V8 small block up to & including 1970 used it.
The Power Steering belt was originaly part #3927158 and was 3/8" X 36-1/4 inches long.Nearly every Chevrolet vehicle w/a V8 small block up to & including 1970 used this as well.
|
|
#3
07-30-2007, 10:08 PM
|
|||
|
|||
|
Re: Fan Belt P/N's 70 Z-28
Did some small blocks come without AIR injection and a smog pump? If so, they would take a shorter belt I would think.
Rick, thanks for the info! Paul
__________________
70 Camaro LA Z-28 03B Citrus Green LT-1 M-40 3.73's 69 Camaro X-77 Z-28 10C Cortez Silver M-21 3.73's Deluxe Project X - SOLD 69 Camaro X-77 Z-28 01B Garnet Red w/Black top, M-20 3.73 Deluxe Houndstooth
|
|
#4
08-02-2007, 05:34 PM
|
||||
|
||||
|
Re: Fan Belt P/N's 70 Z-28
You're right Paul.
I gave you the wrong belt numbers. I have those two used belts hanging here on a wall,and forgot they were taken off of NON A.I.R/solid lifter equipped smallblocks. These are the correct belts for the 1970-74 Z/28 LT-1. *Fan/Alt. w/A.I.R #3883248,later superseded by #9433746.Both measure 3/8 X 47". *Power Steering #3986192,later superseded by #9433723.Both measure 3/8 X 35".
|
|
|
|
Linear Mode
