![]() Dedicated to the Promotion and Preservation of American Muscle Cars, Dealer built Supercars and COPO cars. |
|
Register | Album Gallery | Thread Gallery | FAQ | Community | Calendar | Become a Paid Member | Today's Posts | Search |
![]() |
|
Thread Tools | Display Modes |
#1
|
||||
|
||||
![]()
Just getting around to figuring-out the 3/4" ride height difference from the lower, driver side vs.the higher passenger side (both at the front & rear, even though the front is a tad bit less), measured from ground to mid-line of wheel opening) on my Impala.
Frame has never been off, front end rebuilt in 84 yet rides like a dream. Has F41 suspension. Thought about doing the rear springs to see what that does?? Any advise on this step and maybe where to buy the springs that would be correct ![]() Jeff x2 ![]()
__________________
Jersey Jeff 69 Day-2 L89 T400 BX 2015 ZL-1 Auto 98 Surburban |
#2
|
|||
|
|||
![]()
Is your car nice enough underneath to still be able to read the tags on each spring? It's possible that at sometime in it's life, one spring may have been replaced.
If you can read the little tags, and post the letter codes, I can tell you what springs they are. John |
![]() |
|
|