Dedicated to the Promotion and Preservation of American Muscle Cars, Dealer built Supercars and COPO cars. |
|
|||||||
| Register | Album Gallery | Thread Gallery | FAQ | Community | Calendar | Become a Paid Member | Today's Posts | Search |
|
|
|
Thread Tools | Display Modes |
|
#1
|
|||
|
|||
|
I have a few survivor cars that have sat a long time and was just wandering a few have squeaky speedo cables or dash speedo itself and its just plain annoying when u are cruzin...I think
i remember a tool that used to grease the cable all the way up to the speedo head itself, i don,t know if it was air powered or hand pump but u installed it at the lower portion of the cable at the trans and it pumped grease up the cable anyone have any ideas???thanks |
|
#2
|
|||
|
|||
|
I put a new lubed cable in our '72 Lemans. Turns out the noise is in the head itself. I'm going to try some spray in the back of the head and see if that works.
__________________
Chevelleless after 46 years......but we did find a low mileage, six speed, silver 2005 Corvette. It will just have to do for now.
|
|
#3
|
||||
|
||||
|
A buddy of mine here is Flemington, NJ runs a Shell station that caters to old cars. He has the exact tool you are talking about. He was a mechanic on all these cars back in the early 70's and never got rids of his old tools. The contraption has its own reservoir and is powered by a portable drill. It connects to the speedo cable flange and spins the cable while it injects the lube under light pressure. I can put you in touch with him if you are close (I see you're in PA). He loves working on the old stuff.
|
|
#4
|
|||
|
|||
|
thats the tool !!!!
please send me the contact info if anything maybe i can get a name of the tool or? thanks |
|
#5
|
||||
|
||||
|
PM sent.
![]() |
![]() |
|
|