Dedicated to the Promotion and Preservation of American Muscle Cars, Dealer built Supercars and COPO cars. |
|
|||||||
| Register | Album Gallery | Thread Gallery | FAQ | Community | Calendar | Become a Paid Member | Today's Posts | Search |
|
|
|
Thread Tools | Display Modes |
|
#1
10-11-2005, 04:26 AM
|
|||
|
|||
69 Yenko Specifications.. figures needed
Hey guys,
Im new to this forum , so pls excuse me if this is in the wrong place... Im from the RACER ,a free Simulation which uses real life data as the physics/handling of each 'chosen' car... We currently have a fully 3d 1969 Yenko Camaro (L72 code), which is done in all aspects except the handling, which is why Im posting here... I already have the Gearbox ratios, Engine Torque, and diff ratio.. but thats where my luck ran out when it came to finding info.. So what Id like if at all possible is any of the following: Spring rates Shock rebound and bound rates Turns to Lock Wheel lock (not overly important but still) Brake data Torque/Power/Dyno Curve photo Idle Rpm Clutch clamping pressure Antiroll Bar/Sway Bar/Stabilizer Shaft rates Center of Gravity Wheel weight Vehicle weight Camber (if any) on the front wheels Toe (if any) Also If you have any sounds they would be much appreciated as well, preferably at a constant rpm ( so samples can but cut from , to be used ingame) , starter etc etc. Anything would be much appreciated, and the forum/website here would get a Mention in the Credits of the car when released.. Here is a few pics of Camaro's that have been released, I worked on the '68, and the '84 The '69 is done by the same maker as the Yenko that Im currently helping out on. Lemans blue '69 Frost Green '69 '84 Z28 '72 Camaro '68 Camaro Those are just a very small amount of the cars Available for racer, most are released at RSC Cheers,Chris   Ps any questions you have feel free to ask 
|
|
#2
10-26-2005, 09:09 PM
|
|||
|
|||
|
Re: 69 Yenko Specifications.. figures needed
Thats really cool, I added the mandatory bumperettes and fixed the trunk paint
 Can I have a job??  
__________________
SamLBInj 69 Z/28 X33D80 72-B H-D 105 FLSTC
|
|
#3
10-26-2005, 09:50 PM
|
||||
|
||||
|
Re: 69 Yenko Specifications.. figures needed
Good job Sam
__________________
~JAG~ NCRS#65120 68 GTO HO 4 spd Alpine Blue /Parchment 2 owner car #21783 71 Corvette LT1 45k miles Orig paint - Brandshatch Green - National Top Flight - last known 71 LT1 built. 71 Corvette LT1 42k miles Original paint - Black - black leather - only black LT1 known to exist. NUMEROUS Lemans blue Camaros, Monza Red and Daytona Yellow Corvettes & a Chevelle or two... Survivors, restored cars, & other photos https://picasaweb.google.com/lh/myphotos
|
|
#4
10-26-2005, 10:14 PM
|
|||
|
|||
|
Re: 69 Yenko Specifications.. figures needed
[ QUOTE ]
Good job Sam [/ QUOTE ] Race ya.. 
__________________
SamLBInj 69 Z/28 X33D80 72-B H-D 105 FLSTC
|
|
#5
10-26-2005, 10:17 PM
|
|||
|
|||
|
Re: 69 Yenko Specifications.. figures needed
Whoever drew all those did an amazing job, Looks like a lot of time went into it, seeing the interior through the glass is incredible
__________________
SamLBInj 69 Z/28 X33D80 72-B H-D 105 FLSTC
|
|
#6
11-16-2005, 02:50 PM
|
|||
|
|||
|
Re: 69 Yenko Specifications.. figures needed
Hehe,
Sorry for the Very slow reply, I've just had my end of year exams, been full on for a few weeks.. Looks quite cool, your PS of the pic.  @SamLBInj - No one drew them, You can actually drive that car ingame, thats just the baby 302 though, the same 3d artist made a Yenko version which is why Im after specs, to do the handling of it, and also to try and get some accurate sounds Cheers,Chris
|
|
|
|
Linear Mode
