69 Camaro OE front seat belts w/ shoulder harness

[HawkX66]

Would someone mind posting a pic of some original front seat belts from a 69 w/ shoulder harness? Preferably with standard interior although I'm sure deluxe looks about the same for mounting purposes. I only need to see the female side that is bolted to the tunnel. I'd like to see a pic of them mounted if someone has one. There should be two receivers on each side of the tunnel mounted by one bolt each in a plastic sleeve of some sort.
I'm having trouble locating my originals and I'd like to see exactly what I should be looking for. For some reason I didn't pack them in the box with the rest of my belts and buckles... Hopefully I'm not going to need to replace them.

[Kurt S]

Belts are independent of standard / deluxe interior.
http://www.camaros.org/seatbelt.shtml

[HawkX66]

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Kurt S</div><div class="ubbcode-body">Belts are independent of standard / deluxe interior.
http://www.camaros.org/seatbelt.shtml </div></div>
I'm actually looking for buckles, not belts. Sorry about that...

[m22mike]

Hawk
After your last post I am not sure what you looking for [img]<<GRAEMLIN_URL>>/dunno.gif[/img] if it is mounting these might help. FYI, all the correct model #'s are in a chart at CRG that Kurt posted the link to.
The front retractor and 1 seat belt is tagged model 2904 (2 pieces), the shoulder harness is model 2950 (2 pieces) along with the belt that goes on the tunnel with 2904. both are the same length, and when mounted together both lables face out.
All the rear belts are model 2910
The photos are from a 17K mi. car that was not messed with.

Rear

[HawkX66]

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: m22mike</div><div class="ubbcode-body">Hawk
After your last post I am not sure what you looking for [img]<<GRAEMLIN_URL>>/dunno.gif[/img] if it is mounting these might help. FYI, all the correct model #'s are in a chart at CRG that Kurt posted the link to.
The front retractor and 1 seat belt is tagged model 2904 (2 pieces), the shoulder harness is model 2950 (2 pieces) along with the belt that goes on the tunnel with 2904. both are the same length, and when mounted together both lables face out.
All the rear belts are model 2910
The photos are from a 17K mi. car that was not messed with. </div></div>
There we go. Thanks Mike. It was pictures two and three that I was looking for. Also, you cleared up another part that was confusing me. Both belts and buckles have one part number. I figured there would be a separate one for each. Any chance you have a better pic of the plastic cover in pic two?

[m22mike]

I do not, there are two types of covers, one has a snap, the other does not . I will see if I can get a picture for you tomorrow.
The belt model # is a assembly, and includes a buckle and the clasp. [img]<<GRAEMLIN_URL>>/scholar.gif[/img]

[Unreal]

Note how the outer belt on the rear is mounted &quot;upside down&quot;. Prior to removing mine, which I think were never off the car, I photographed them, and noted that they were upside down. Iam baffled as to why they are like that.

[m22mike]

If you take notice, that bolt is higher than the others, I am guessing that is the reason. Both sides the same.

Mike

[HawkX66]

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: m22mike</div><div class="ubbcode-body">I do not, there are two types of covers, one has a snap, the other does not . I will see if I can get a picture for you tomorrow.
The belt model # is a assembly, and includes a buckle and the clasp. [img]<<GRAEMLIN_URL>>/scholar.gif[/img] </div></div>
That'd be great if you could.

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Unreal</div><div class="ubbcode-body">Note how the outer belt on the rear is mounted &quot;upside down&quot;. Prior to removing mine, which I think were never off the car, I photographed them, and noted that they were upside down. Iam baffled as to why they are like that.</div></div>
That's why I was looking for pictures. There's always something odd. I'm not remembering how mine were at all when I took them out. I can't find them right now which makes me nervous... Any chance you still have the pics when you photographed yours?

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: m22mike</div><div class="ubbcode-body">If you take notice, that bolt is higher than the others, I am guessing that is the reason. Both sides the same.

Mike</div></div>
That helps. I still have all my original bolts. I probably wouldn't have noticed that. It's probably also because they're mounted on top of the carpet where the rears are bolted directly to the floor pan.

[m22mike]

Here is a shot of the cover. If you look closely there is a metal tab inside that grabs the end of the metal mounting tab on the belt, this keeps it in place. Use some heat when working them into place. what other pictures are you looking for ? What I posted is about all I have saved.