replacement gloves sandblast cabinet

**Lynn** · #1 12-01-2013, 12:22 AM

Scored an old Snap-On sandblast cabinet last weekend. Yes, I know the Snap-On blast cabinets are way overpriced, but I did OK at $240.

The left glove is worn through. Don't want to order gloves from the SO dealer, as they too are overpriced, I am sure.

What replacement gloves are you guys using on blast cabinets? Cheap is good, but I want them to last.

The inside diameter of each hole is just over 6 inches.

**Lynn** · #2 12-01-2013, 01:08 AM

Uh, just under 6 inches. Closer to 5.5.

**SuperNovaSS** · #3 12-01-2013, 01:24 AM

I use the Tacoma company in Washington and the grit guy in Sacramento,CA for my blast stuff. They are both reasonable.

Jason

wrench · #4 12-01-2013, 02:02 AM

Lynn.... I have a Scat Blast cabinet and a new pair of gloves for it. I will measure tomorrow and let you know the size. They are a good company to deal with and fast shipping.

TDW · #5 12-01-2013, 10:23 AM

I use these guys for blasting stuff.
http://www.tptools.com/Sandblasting-Gloves.html

**Lynn** · #6 12-01-2013, 02:32 PM

Thanks for all the replies.

Got a rec for these from someone on garage journal site and bought a pair.

http://www.ebay.com/itm/160990135319...ht_2259wt_1007

They come sized for my 5.5 inch openings.

Will report back.

**Lynn** · #7 12-01-2013, 02:35 PM

sometimes when I paste a web address into the message, it links, other times it does not.

wrench · #8 12-01-2013, 02:42 PM

Glad you found something that will work. The holes in my cabinet are 61/2 in. so the Scat Blast gloves would not work.

Enoch · #9 12-01-2013, 05:46 PM

Graingers has them in multiple sizes

Dedicated to the Promotion and Preservation of American Muscle Cars, Dealer built Supercars and COPO cars.