Go Back   The Supercar Registry > General Discussion > Technical & Restoration


Reply
 
Thread Tools Display Modes
  #1  
Old 09-23-2006, 01:49 AM
Verne_Frantz Verne_Frantz is offline
Senior Member
 
Join Date: Jul 2003
Location: Central New Jersey
Posts: 3,793
Thanks: 34
Thanked 240 Times in 123 Posts
Default M&H RACEMASTER slick decoding needed!!

I need help decoding a pair of NOS M&H cheater slicks I have. Each tire has an old brown shipping label which says M&H RACEMASTER WARETOWN, MASS on it. They were shipped to California Speed & Sport Shop, Jersey Ave. New Brunswick, NJ. These tires have two segmented circumficial grooves in the slick surface and two very fine raised circumficial ridges on each side about 1/2" below the meat of the slick. (sorry, if I had a camera, I could post pictures)

Each tire has the following raised lettering: 7.0/30.5-15, NOT FOR HIGHWAY USE. Each also has an indented mold mark (between the typical 2 screw holes) with raised numbers 130. ( I believe this may be the compound #) Each tire also has yellow crayon writing on the contact surface that says,
7.0
30.5
130

One tire has a raised R-7 and one has F-7. One tire also has a mold plate (with the typical screw heads) with J491706. The other has J491805.

I'm always amazed at how Rick can decode OEM tires, but I was hoping someone could decode these M&Hs for me. The raised large letter M&H RACEMASTER logo is in outlined letters, but with no white ink anywhere. One tire has a white ink stamp about the size of a postage stamp with 2 characters in it, but I can't make them out (maybe a letter and a number?)

I mainly would like to know what date these tires are. And any other info would be greatly appreciated. (or any leads where I can find it)

Thanks guys!

Verne
Reply With Quote
Click here to view all the pictures posted in this thread...
  #2  
Old 09-23-2006, 01:58 AM
Belair62 Belair62 is offline
Senior Member
 
Join Date: Nov 2000
Location: Suburban Chicago
Posts: 13,448
Thanks: 0
Thanked 14 Times in 11 Posts
Default Re: M&H RACEMASTER slick decoding needed!!

Those are new repops..I'll give you 50 bucks for them
__________________
<span style="font-weight: bold"> (__{B}_____]]]]~~~~</span>
Don't mess with old farts - age and treachery will always overcome youth and skill! Bullshit and brilliance only come with age and experience.
Reply With Quote
  #3  
Old 09-23-2006, 02:05 AM
Verne_Frantz Verne_Frantz is offline
Senior Member
 
Join Date: Jul 2003
Location: Central New Jersey
Posts: 3,793
Thanks: 34
Thanked 240 Times in 123 Posts
Default Re: M&H RACEMASTER slick decoding needed!!

[ QUOTE ]
Those are new repops..I'll give you 50 bucks for them

[/ QUOTE ]

Go soak your head!
Reply With Quote
  #4  
Old 09-23-2006, 02:06 AM
396L35's Avatar
396L35 396L35 is offline
Senior Member
 
Join Date: Jan 2003
Location: Herculaneum, MO
Posts: 1,807
Thanks: 0
Thanked 2 Times in 2 Posts
Default Re: M&H RACEMASTER slick decoding needed!!

[ QUOTE ]
Those are new repops..I'll give you 50 bucks for them

[/ QUOTE ]
They are new repops..I'll give you $100 for them!!!!
__________________
Mark
Reply With Quote
  #5  
Old 09-23-2006, 02:21 AM
Verne_Frantz Verne_Frantz is offline
Senior Member
 
Join Date: Jul 2003
Location: Central New Jersey
Posts: 3,793
Thanks: 34
Thanked 240 Times in 123 Posts
Default Re: M&H RACEMASTER slick decoding needed!!

Come on guys.................

If these turn out to be the right dates, I already have the perfect car in mind.......

That short person in Chicago can probably guess what it is..............

Verne
Reply With Quote
  #6  
Old 09-23-2006, 03:52 AM
Salvatore Salvatore is offline
Yenko Contributing Member
 
Join Date: Nov 2002
Location: Pennsylvania
Posts: 9,908
Thanks: 3
Thanked 229 Times in 193 Posts
Default Re: M&H RACEMASTER slick decoding needed!!

Vern, I have a 71 catalog that those tires are listed in exactly. 130 and 131 are the compounds. Sam
Reply With Quote
  #7  
Old 09-23-2006, 04:18 AM
Verne_Frantz Verne_Frantz is offline
Senior Member
 
Join Date: Jul 2003
Location: Central New Jersey
Posts: 3,793
Thanks: 34
Thanked 240 Times in 123 Posts
Default Re: M&H RACEMASTER slick decoding needed!!

'71 huh? I was hoping they might have been offered about 8 years earlier.... Does the description describe what that compound was suited for?

I hope someone can DATE these tires.

Sam, I appreciate your input. Thanks for the response.

Verne
Reply With Quote
  #8  
Old 09-23-2006, 05:59 AM
Salvatore Salvatore is offline
Yenko Contributing Member
 
Join Date: Nov 2002
Location: Pennsylvania
Posts: 9,908
Thanks: 3
Thanked 229 Times in 193 Posts
Default Re: M&H RACEMASTER slick decoding needed!!

Yes, 130 was for "MOVE POWER" effective for most track conditions. 131 was for "EXTREMELY" poor traction strips. The 71 catalog listing does not mean they were not available earlier.
Reply With Quote
  #9  
Old 09-25-2006, 01:05 AM
Verne_Frantz Verne_Frantz is offline
Senior Member
 
Join Date: Jul 2003
Location: Central New Jersey
Posts: 3,793
Thanks: 34
Thanked 240 Times in 123 Posts
Default Re: M&H RACEMASTER slick decoding needed!!

Thanks Sam,
I wish someone could date them from the mold numbers. The faded shipping labels have zip codes on them, so I guess that dates them at least as 63+ (I think '63 was when they started that)
I did look in an Honest Charley catalog I have form 65 1/2. M&amp;Hs are listed but these are not.

Anyway, they're still as soft and supple as new. Always stored in a cool dark place. I'm not fishing for a buyer because I had no intention of selling them, but I heard from someone I know who is looking for a pair like these for a very special car, but I have no idea what they're worth. (maybe $300.??)

I know a lot of early ones had sizes like 8.50-9.00, or 8.75-9.25, etc, so I wonder if the 7.0/30.5-15 is an earlier or later labelling technique? (I'm guessing later. I think the diameters became important later)

Anyway, thanks. Sure wish I could date them.

Verne
Reply With Quote
  #10  
Old 10-06-2006, 08:07 PM
Jeff Murphy Jeff Murphy is offline
Senior Member
 
Join Date: Sep 2002
Location: People's Republic of CT
Posts: 1,237
Thanks: 0
Thanked 2 Times in 2 Posts
Default Re: M&H RACEMASTER slick decoding needed!!

Again not a date, but they aren't in a 69 Midwest Auto Specialities catalog. The tire sizes are still in the 900/15 style and they show Super Stock tires with compounds of XS11/12/14 or Stock Drag tires with two visible grooves and compounds 140/150/160.
__________________
Jeff M.

ZL1 #49 (Dale, Waukesha WI) Super Stock restoration by SCW; 9561AA (Walters, Hebron OH) Super Stock motor by the Grump
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT. The time now is 04:39 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.

O Garage vBulletin Plugins by Drive Thru Online, Inc.