spraying rattle can bare steel paint

[302moz]

Having a problem spraying bare steel paint/stainless paint. When you spray it clumps up and gets rough.Tried different cans all the same.Anyone else have this same problem?shaking the can for along time makes no difference. thanks

[quik9r]

fine coat of primer first may help, I use Sherwin Williams self etching primer

[earntaz]

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: quik9r</div><div class="ubbcode-body">fine coat of primer first may help, I use Sherwin Williams self etching primer</div></div>

Yep -- self etching primer is a must ... for sure on steel ... TAZ

[jl8z28]

You must have something on the metal I never use primer so easy to do bare metal

[whitetop]

Was you spraying out in the hot sun and the metal was hot? That will cause the clumps.

[302moz]

the paint goes on top of epoxy primer mixed with reducer as a sealer

[m22mike]

What brand are you using John ?

[302moz]

inline tube brand

[m22mike]

I will not buy anything from them [img]<<GRAEMLIN_URL>>/bs.gif[/img] for reasons I won't go into here. So I never used there brand, most likley it is repackaged anyway. I have had nice results with Seymour paints, but I do not use allot of rattle can paint.

Stainless Paint

[Mr70]

Mike
Can you show us a picture of what you painted with that?
Can it handle High Heat too?