Any oppinions on this build sheet??

[COPO 70 RS/Z28]

I was wondering if anyone could offer opinions on this sheet. The photos of the car look beautiful, I have not seen this sheet in person.



thanks

[wundercluck]

Build sheet looks good to me but I am far from an expert. Has alot of the same codes on it as the one for my 70 Z, sure doesn't look loke it was found on top of the gas tank.

[Donutblue]

Looks like some awful crisp edges on there, as well as a suspiciously looking clean area on the bottom right of the document. No horizontal or vertical creases ?

[COPO 70 RS/Z28]

Well the reason I was curious was the car this belongs to is for sale. It shows a 9796 copo option on the sheet but the way it is described verbally on the sheet is different than all the other sheets which belong to other 9796 cars, the description is akin to the wording used on a window sticker for the option, but is not the way option is presented on the build sheets of the three other known cars ????

[Donutblue]

Carl, you've already described 2 strikes against it yourself -- if it quacks like a duck and walks like a duck -- ?

[al8apex]

[ QUOTE ]
Well the reason I was curious was the car this belongs to is for sale. It shows a 9796 copo option on the sheet but the way it is described verbally on the sheet is different than all the other sheets which belong to other 9796 cars, the description is akin to the wording used on a window sticker for the option, but is not the way option is presented on the build sheets of the three other known cars ????





[/ QUOTE ]

what plant were the "other cars" built? Norwood? You are showing a Van Nuys build sheet ...

[DarrenX33]

FWIW, aside from the questionable COPO line item I see nothing unusual with this buildsheet. Being that they are very close, I would expect that yours and this one should be pretty identical.

[Late BrakeU2]

[ QUOTE ]
FWIW, aside from the questionable COPO line item I see nothing unusual with this buildsheet. Being that they are very close, I would expect that yours and this one should be pretty identical.

[/ QUOTE ]

I checked it side by side with my 04A VN Z,it looks good but i'm no expert either. I always thought the COPO cars started at 06A though. FWIW those are the original plates,so good chance it's spent it's whole life in So cal. I have seen a couple hi po cars from Vern Trider-nice amount of options for a non RS Z. Bruce B. grew up by that dealer maybe he'll chime in ..

If you need me to check the car out it's local- shoot me PM.

[Xplantdad]

[ QUOTE ]
[ QUOTE ]
FWIW, aside from the questionable COPO line item I see nothing unusual with this buildsheet. Being that they are very close, I would expect that yours and this one should be pretty identical.

[/ QUOTE ]

I checked it side by side with my 04A VN Z,it looks good but i'm no expert either. I always thought the COPO cars started at 06A though. FWIW those are the original plates,so good chance it's spent it's whole life in So cal. I have seen a couple hi po cars from Vern Trider-nice amount of options for a non RS Z. Bruce B. grew up by that dealer maybe he'll chime in ..

If you need me to check the car out it's local- shoot me PM.

[/ QUOTE ]

Vern Trider was at 215 S. Euclid in Anaheim...that's for sure...

See here: https://www.yenko.net/ubbthreads/show...0/fpart/3/vc/1

[PeteLeathersac]

Zone #20
Dealer #413
Vern Trider Chevrolet
215 N. Anaheim Blvd.
Anaheim California 92805
(Info circa 1970)

Above is NCRS info & appears to be the same address and codes as the build sheet shown..


~ Pete