Gas Gauge Wiring

**turbojet427** · #1 04-09-2011, 03:57 PM

I am installing the factory dash gas gauge on a 69 Camaro,the one that mounts in the dash between the factory tach and speedo. The car was an original console car, so there is no provisions on the factory harness for this gauge. Does anyone know how to wire it? There are three studs on the back of the gauge.

m22mike · #2 04-09-2011, 04:23 PM

Matt
Check you email, I sent you a diagram for the fuel gage.
If it has the console wiring, you may be able to make a harness to extend up to the dash. Look for a plug with pink, tan, and black wires.

Mike

**turbojet427** · #3 04-09-2011, 04:40 PM

THANK YOU!!!!!!

m22mike · #4 04-09-2011, 06:09 PM

Does that make sense to you ??

Mike

**turbojet427** · #5 04-09-2011, 10:42 PM

Yes it does! I was able to add it to my harness and make it work. THANKS!!!

Kim_Howie · #6 04-10-2011, 12:02 AM

What, you were suprised it worked!!

**mockingbird812** · #7 04-10-2011, 12:11 AM

Kim - I think he was more surprised that the cantankerous sailor from Canton knew what the h*ll he was talking about!

[img]<<GRAEMLIN_URL>>/whistle.gif[/img]

m22mike · #8 04-10-2011, 12:49 AM

OK "Magazine cover boy" that'll be about enough out of you.. [img]<<GRAEMLIN_URL>>/rolleyes.gif[/img]

**enio45** · #9 04-10-2011, 12:53 AM

The guys from OHIO never cease to amaze me :-)

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Dedicated to the Promotion and Preservation of American Muscle Cars, Dealer built Supercars and COPO cars.