[L30M20]

Hello, The tape is used to hold the 4 body bushings, from side to side of bushing across the top part thru the hole where the bolt goes thru, in other words, the tape ran parallel with the frame on the middle bushing. On the rear bushing it was parallel with the trans crossmember. The radiator bushings had a retainer on them thru the bolt to hold them on. Its in the Assy. Manual. The tape is similar to 1-1/2 masking tape, flat black in color. I think Paragon or Quanta has it for the Vette guys. Hope this helps, Craig