Re: Drive Shaft U-Joint/Rear End Pinion Flange Pro
[ QUOTE ]
Rob...I have the driveshaft out of my 70 Nova[same rear end as yours?] I can crawl under it and measure anything you want on the yoke. let me know what you need.
[/ QUOTE ]
Tony, If you can measure both the ID between the ears or tabs on the yoke, and the OD of the caps on the u-joint.
John, I also looked at the "girdles" that Moroso makes. Thanks for the info.
__________________
Rob
69 <font color="orange">HO</font> Z-28
|