Re: Question about BB 4speed crossmember
Good info here Gents on a much over-looked topic. Allow me to add a little more:
The OEM shifter mounting holes are different relative to the tranny mounting holes on big block xmembers. They are offset to the left about 1/4" compared to SB. This allows the BB shifter linkage to align correctly. Yes, a mismatch will work, but thats not the way they were from the factory.
This applys only to 67-8 Camaros.
__________________
Craig S.
"I saw Elvis At 1000 Feet"
John Force.
|