[YENKO DEUCE REGISTRY]

Hi Chitown,

There are several things to check:

Make sure the core support has the big opening - but no extra holes on the driver's side for a/c stuff. Also, make sure there is a weldnut on the front of the passenger's side for the rad to bolt into.

Check the trans crossmember for the square opening with one angled corner.

Check for the bb engine mounts, they offset the block 1/2" towards the passenger side (as does the trans crossmember).

Check for the single 3/8" fuel line, but several L34 cars have been found with only one line - primarily early cars built b4 the end of '68.

Check the driver's side rear frame rail in the wheel opening for the dual exhaust plate.

Check for rear sway bar brackets welded to the underside of the floor boards above the muffler.

Check for all the disc brake stuff.

Let us know all the codes on the trim tag, and we can decipher them for you.