Re: General LT-1 Information
I installed the cam straight up, and I'm not sure if there is any advance ground into it.
The cam card says to set the valves at .020/.025 I/E "HOT". What do you set them at for initial startup in order to reset them when they are 'hot'?
Also, I used the required GM Lubricant #12345501, but it looks really thin!
__________________
Marlin
70 Yenko Nova-350/360, 4speed M21, 4.10 Posi (Daddy's Ride)
69 SS Nova-396/375hp, 4speed M20, 3.55 Posi (Benjamin's Ride)
67 RS Camaro-327/250hp, 2speed Glide, & 3.08 Open (Danny's Ride)
|