Re: Body Paint question for the Pro's
hugger
Were you going to use any K36 or uro fill over the DP50? I suggest you use a primer surfacer like these, guide coat, and block before you paint. Be sure you have enough paint, as no two mixes are exactly the same.Try to keep your air pressure consistant as possible, and your distance from the surface. You may want to check on the mixing formula they use for Lemans blue. Sometimes when paint jobbers run an old color like this the computer crossreferences the closest newer color, which is on a mid 80's cavilier. It's very close, unless you park next to an orginal.Double check with you jobber, and shoot some sprayout cards, tinting the color until your happy with it.
Ken
|