Re: yenko chevelle wheels
Jeff, you are better off selling them. About the only ones that can use those are guys with the 70-73 Camaro's and 73-77 Chevelle's. Those slot's that I looked at buying were 15 x 10 and had 3-1/2" of backspacing and were on a 72 Camaro. They looked good on the back of it with 275/60 tires but they did rub a little, but not much.
The Blue Maxi (69 Car & Driver give-away car) had 15 x 8-1/2" 200S wheels on it with G60 tires but I do not know how they got them to clear on the front. The last time I saw the car it had 245/60 Goodyear Eagles all the way around. The rear wheelwell lips had been rolled under a little and a couple of the bolts holding the front wheelopening moldings on were removed. I could not tell if there was some "massaging" of the inner fenders for clearance. I sold a set of 4 8-1/2" rims to a friend and he put them on his 69 RS and he could not run the same size tire on the front as he did on the rear. He probably could have if he would have taken the time to do some measuring and test fitting. He is running a very short and narrow 75 series tire up front that really "balloons" the sidewall out, it does not look good at all. Try finding a pair of 15 x 7's to match the two 8-1/2's you already have and mix them up that way..................RatPack.................
|