[Warren Malkin]

Didn't notice the rear having any extra welds, but when I go back, I have a laundry list of things still to check.
I failed to mention before that the drivers rear frame rail had the plate welded to it for the tailpipe hanger. Also had the 3/8ths fuel line. I checked one front rotor, and it was the two piece design, hub bolted to the rotor. Front of frame had tow tabs attached. I will check front of frame to see if it has the hole for front spoiler, center brace screw. I didn't check out the front sheet metal to see if it is original to the car. Not sure if it originally came with a rear antenna. The pass door wouldn't open, as it was hanging up on the pass fender. I was going to see if there was a plug where the antenna lead goes through between the door hinges.
I will check out more on the engine, and the car in general. I'll see if he has the air cleaner asm. I was on limited time checking out the car, as Bill was 45 minutes late showing up.
I will call him tomorrow and see if I can look at it again tomorrow night.
I will post my findings. Warren